LED Screens

Unilumin UPAD 3 2.6mm

Unilumin UPAD III 2.6

The Unilumin UPAD III 2.6 is a Hi-Res 2.6mm surface mount Indoor LED product.   Optional curving plates allow for up to 5 degree convex and 10 degree concave curves.  Unilumin offers both ground support and hanging options.  2.6mm tight pixels provide exceptional display performance.  UPAD III 2.6 with NoveStar has superior consistency under low brightness status, even reduced to 20% brightness.  Its 1200 Nits of brightness allows for the LED to hold up under heavily lighted indoor situations without video washout.  A smooth display image is achieved with a 2880Hz refresh rate.  Each LED tile measures 19.69” square, and can be built into any size and configuration.  The light weight (22 lbs) tile construction and low power draw make LED screens an achievable solution for just about any application today.  UPAD III 2.6mm has the ability to run at either 208V or 120V power, making the lack of high voltage onsite power an issue of the past.  The NovaStar LED processor makes for an easy configurable setup.

Download the Unilumin UPAD III 2.6mm Spec Sheet (PDF)

Download the Unilumin UPAD III 2.6mm Grids 16×9 Aspect Wall Layouts (PDF)

Click here to view the Unilumin UPAD III 2.6mm dimensions

Calibrated Brightness 1.200 NIT
Contrast Ratio 5,000:1
Visual Resolution 2.6 mm
Hor. viewing angle +/- 140°
Vert. viewing angle +/- 120°
Tile dimensions Width: 19.69″ Height: 19.69″ Depth: 3.39″
Weight 22 lbs
Max Power Consumption .8 amps @ 208V
Max Power Consumption 1.6 amps @ 120V
Temperature range Operating: -10°F Humidity: 10% <> 90%
Screen size Unlimited
Lifetime >100.000 hr
Processing NovaStar

Absen A3Pro

The Absen A3Pro is a Hi-Res 3.9mm surface mount Indoor LED product.  Each LED tile measures 19.69” square, and can be built into any size and configuration. Intelligent, integrated connections eliminate any visible seams between tiles, creating a truly seamless video display. 3.9mm tight pixels provide exceptional display performance and perfect embodiment of Ultra HD LED technology. A3Pro is endowed with superior consistency under low brightness status, even reduced to 20% brightness. A smooth display image is achieved with a 2000Hz refresh rate.  Its 1200 Nits of brightness allows for the LED to hold up under heavily lighted indoor situations without video washout. The light weight (20 lbs) tile construction and low power draw make LED screens an achievable solution for just about any application today.  A3Pro has the ability to run at either 208V or 120V power, making onsite power an issue of the past. The NovaStar LED processor makes for an easy configurable setup using any computer with a USB connection.

Download the Absen A3Pro Spec Sheet (PDF)

Download the Absen A3Pro Grids 16×9 Aspect Wall Layouts (PDF)

Click here to view the Absen A3Pro dimensions

Calibrated Brightness 1.200 NIT
Contrast Ratio 3,500:1 @ 200 lux
Visual Resolution 3.9 mm
Hor. viewing angle +/- 140°
Vert. viewing angle +/- 140°
Tile dimensions Width: 19.69″ Height: 19.69″ Depth: 3.78″
Weight 20.28 lbs
Max Power Consumption .61 amps @ 208V
Max Power Consumption 1.23 amps @ 120V
Temperature range operating: 14°F <> 104°F Humidity: 10% <> 90%
Screen size Unlimited
Lifetime 50.000 hr Minimum
Processing NovaStar

Unilumin UPAD III 4.8mm Outdoor LED

Unilumin UPAD III 4.8

The Unilumin UPAD III 4.8 is a Hi-Res 4.8mm surface mount Outdoor LED product.   Optional curving plates allow for up to 5 degree convex and 10 degree concave curves.  Unilumin offers both ground support and hanging options.  4.8mm tight pixels provide exceptional display performance.  UPAD III 4.8 with NoveStar has superior consistency under low brightness status, even reduced to 20% brightness.  Its 5,500 Nits of brightness allows for the LED to hold up under heavy light.  A smooth display image is achieved with a 2880Hz refresh rate.  Each LED tile measures 19.69” square, and can be built into any size and configuration.  The light weight (23 lbs) tile construction and low power draw make LED screens an achievable solution for just about any application today.  UPAD III 4.8mm has the ability to run at either 208V or 120V power, making the lack of high voltage onsite power an issue of the past.  The NovaStar LED processor makes for an easy configurable setup.

Download the Unilumin UPAD III 4.8mm Spec Sheet (PDF)

Download the Unilumin UPAD III 4.8mm Grids 16×9 Aspect Wall Layouts (PDF)

Click here to view the Unilumin UPAD III 4.8mm dimensions

Calibrated Brightness 5,500 NIT
Contrast Ratio 3,000:1
Visual Resolution 4.8 mm
Hor. viewing angle +/- 140°
Vert. viewing angle +/- 120°
Tile dimensions Width: 19.69″ Height: 19.69″ Depth: 3.39″
Weight 23 lbs
Max Power Consumption 1.1 amps @ 208V
Max Power Consumption 1.92 amps @ 120V
Temperature range Operating: -20°F Humidity: 10% <> 90%
Screen size Unlimited
Lifetime >100.000 hr
Processing NovaStar

Barco C5

Barco C5 LED tiles are 5.5mm light weight modular Indoor LED tiles that can be put together in any configuration to make any sized LED screen. C5 is precision engineered to have seamless conectivity from panel to panel. Along with the 5.5mm pixel pitch resolution, the C5 has an output brightness of 2,000 NITS, and uses the 3-in-1 black face SMD LED technology (Surface Mount Diode). The C-series is light weight, easy to install, silent, and power efficient. Combining the C5 with Barco’s renowned DX based processing results in a versatile product. The C5 LED processing offers source compatible for up to 2048 x 1536. Incorporating Barco’s proprietary System Color Signature technology, each individual LED’s color and brightness characteristics are robotically measured at the factory. This technology allows you to mix and match tiles to obtain a seamless display with a perfect image every single time.

Download the Barco C5 color brochure (PDF)

Download the Barco C5 installation guide (PDF)

Download the Barco C5 layout grid sheet (PDF)

Click here to view the Barco C5 dimensions

Calibrated Brightness 2.000 NIT
Contrast Ratio 3,500:1 @ 200 lux
Visual Resolution 5.5 mm
Hor. viewing angle +/- 60°
Vert. viewing angle +/- 60°
Tile dimensions Width: 15.75″ Height: 15.75″ Depth: 2.75″
Weight 15 lbs
Avg Power Consumption 220 W / Square Meter
Max Power Consumption 660 W / Square Meter
Temperature range operating:  32°F <> 104°F storage: -4°F <> 140°C
Screen size Unlimited
Lifetime 50.000 hr Minimum
Processing DX-Series NNI Based

Absen A6T

The Absen A6T is a Hi-Res 6.25mm pixel pitch – surface mount Outdoor/Indoor LED product.  Each tile measues 19.69” square, and can be built into any size and configuration. Intelligent, integrated connections eliminate any visible seams between tiles, creating a truly seamless video display. A smooth display image is achieved with a 2000Hz refresh rate.  Its 5000 Nits of brightness allows for the LED to hold up under outdoor bright lighting situations, without video washout. The light weight (25 lbs) tile construction and low power draw make LED screens an achievable solution for just about any application today.  A6T has the ability to run at either 208V or 120V power, making onsite power an issue of the past. The NovaStar LED processor makes for an easy configurable setup using any computer with a USB connection.

Download the Absen A6T Spec Sheet (PDF)

Download the Absen A6T Grids 16×9 Aspect Wall Layouts (PDF)

Click here to view the Absen A6T dimensions

Calibrated Brightness 5.000 NIT
Refresh Rate 2000 hz
Visual Resolution 6.25 mm
Hor. viewing angle +/- 140°
Vert. viewing angle +/- 100°
Tile dimensions Width: 19.69″ Height: 19.69″ Depth: 4.33″
Weight 25 lbs
Max Power Consumption .8 amps @ 208V
Max Power Consumption 1.6 amps @ 120V
Temperature range operating: 14°F <> 122°C Humidity: 10% <> 90%
Screen size Unlimited
Lifetime 50.000 hr Minimum
Processing NovaStar

Absen A7

The Absen A7 is a Hi-Res 7.8mm pixel pitch – surface mount Outdoor/Indoor LED product.  Each tile measues 19.69” square, and can be built into any size and configuration. Intelligent, integrated connections eliminate any visible seams between tiles, creating a truly seamless video display. A smooth display image is achieved with a 2000Hz refresh rate.  Its 6000 Nits of brightness allows for the LED to hold up under outdoor bright lighting situations, without video washout. The light weight (25 lbs) tile construction and low power draw make LED screens an achievable solution for just about any application today.  A6T has the ability to run at either 208V or 120V power, making onsite power an issue of the past. The DBStar LED processor makes for an easy configurable setup using any computer with a USB connection.

Download the Absen A7 Spec Sheet (PDF)

Download Absen A7 Grids 16×9 Aspect Wall Layouts (PDF)

Click here to view the Absen A7 dimensions

Calibrated Brightness 6.000 NIT
Refresh Rate 2000 hz
Visual Resolution 7.8 mm
Hor. viewing angle +/- 120°
Vert. viewing angle +/- 120°
Tile dimensions Width: 19.69″ Height: 19.69″ Depth: 4.33″
Weight 25 lbs
Max Power Consumption .8 amps @ 208V
Max Power Consumption 1.6 amps @ 120V
Temperature range operating: 14°F <> 122°C Humidity: 10% <> 90%
Screen size Unlimited
Lifetime 50.000 hr Minimum
Processing NovaStar

Video Walls

Christie Digital MicroTiles

The Christie Digital MicroTiles are the new frontier for high resolution videowall displays. Built on proven DLP technology, Christie MicroTiles are ideal for a wide range of demanding applications where maximum image quality is needed in high-ambient light environments. Leveraging the strengths of both rear projection and LED technology, Christie MicroTiles offer substantially brighter images and a much wider color palette than conventional LCD and plasma displays. With no practical limit to the number of tiles that can be used in a display, Christie MicroTiles can be configured into any shape or size to properly fit into their intended environment. Christie MicroTiles offer a color reproduction capability that exceeds standard LCD displays by over 50%. In this pixel powerhouse, you get 70x more pixels than the most popular 4mm SMD display LEDs. Christie MicroTiles are lightweight (21 lbs) and bright (800 nits), and because they are lit by LEDs they draw very minimal power. The Christie Digital MicroTiles truly are “The New Digital Canvas.”

Download the Christie Digital MicroTiles color brochure (PDF)

Download the Christie Digital MicroTiles shapes brochure (PDF)

Download the Christie Digital MicroTiles user manual (PDF)

Download the Christie Digital MicroTile layout grid sheet (PDF)

Click here to view the Christie Digital MicroTiles dimensions

Calibrated Brightness 800 NIT
Native Resolution Per Tile 720 x 540
Pixel Pitch 0.567mm x 0.567mm
Tile dimensions Width: 16.06′ Height: 12.05′ Depth: 10.24′
Weight 20.3 lbs
Avg Power Consumption 110 W / tile
Max Power Consumption 130 W / tile
Temperature range operating:     5°C <> 40°C
Screen size Unlimited
Lifetime 65,000h [half brightness]

NEC X551UN 55″ Ultra Narrow Bezel LED LCD Screen

NEC X551UN Ultra-Narrow Bezel High Definition full array LED LCD display. 55” LCD screen with built in multi-screen video wall processing, up to a 10×10 display (100 screens). RS-232C, LAN, IR Remote, and DDC/CI for multi monitor control. Will work in both portrait and landscape orientation. Includes digital loop through with DVI-D and DisplayPort.

Download the NEC_X551UN Brochure (PDF)

NEC X463UN 46″ Ultra Narrow Bezel LED LCD Screen

NEC X463UN Ultra-Narrow Bezel High Definition full array LED LCD display. 46” LCD screen with built in multi-screen video wall processing, up to a 10×10 display (100 screens). RS-232C, LAN, IR Remote, and DDC/CI for multi monitor control. Will work in both portrait and landscape orientation. Includes digital loop through with DVI-D and DisplayPort.

Download the NEC X463UN Color Brochure (PDF)

LCD Screens

Sharp LC-80LE632U 80″ LED LCD Screen

The Sharp Aquos LC-80LE632U has a 1080P Full ArrayLED panel, delivering natural, vibrant picture qaulity. Built in Wi-Fi and SmartCentral user interface. Native 120Hz refresh rate and internal speakers.

Download the Sharp LC80LE632U Color Brochure (PDF)

Sharp LC-80LE650U 80″ LED LCD Screen

The Sharp Aquos LC-80LE650U has a 1080P Full ArrayLED panel, delivering natural, vibrant picture qaulity. Built in Wi-Fi and SmartCentral user interface. Native 120Hz refresh rate and internal speakers.

Download the Sharp LC80LE650U Brochure (PDF)

Sharp LC-70UH30U 4K / UHD LED LCD Screen

The Sharp Aquos LC70UH30U has a 3840×2160 edge lit LED panel, delivering natural, vibrant picture qaulity. Built in Wi-Fi and SmartCentral user interface. Native 120Hz refresh rate and internal speakers.

Download the Sharp LC70UH30U Color Brochure (PDF)

Sharp LC-60LE640U LED LCD Screen

The Sharp Aquos LC60LE640U has a 1080P edge lit LED panel, delivering natural, vibrant picture qaulity. Built in Wi-Fi and SmartCentral user interface. Native 120Hz refresh rate and internal speakers.

Download the Sharp LC60LE640U Color Brochure (PDF)

NEC P552

Expand your messaging options with superior screen performance.  The NEC P552, 55” LCD screen, provides a first-class solution for your digital signage applications. Its high contrast, industrial-strength design and Enhanced Digital Signage Technology Suite (DSTS), which boasts more than 30 advanced features, make these displays ideal for 24/7 operation in even the harshest environments. The built-in expansion slot future-proofs your display investment, allowing for seamless integration of NEC and third-party components. Plus, the capability to easily integrate touchscreen technology or protective glass opens these models up to even more applications, including wayfinding and high-traffic areas.  The P552 is a true HD display (1920×1080 resolution), with an 18.5mm ultra-thin bezel to minimize screen gaps in videowall applications.  Ultilizes internal videowall processing for large displays up to a 10×10 configuration.

Download the NEC P552 brochure (PDF)

NEC LCD5220 52″ True HD LCD Screen

NEC Multisync LCD5220 High Definition LCD Display. 52” LCD screen with built in multi-screen Video Wall Processing, up to a 5×5 Display (25 screens). Ultra-thin bezel design with a 19mm bezel per screen. RS-232 for multi monitor control. 10-bit gamma, AutoBright signal input feature, will work in both Portrait and Landscape orientation. Rapid Response Technology delivers virtually uninterrupted, undistorted viewing of high speed full motion video. Aspect Ratio: 16:9 PC Compatibility: VGA up to 1080 Native Resolution: 1920×1080 Video Compatibility: 480i up to 1080p Contrast Ratio: 2,000:1

Download the NEC LCD5220 dimensions (PDF)

Download the NEC LCD5220 color brochure (PDF)

Samsung ME40C Commercial LED LCD Display

Samsung 40” LCD Screens are 16:9 Aspect Ratio with 1920×1080 Resolution.  Built in Samsung SMART Signage Platform allows PowerPoint presentation and videos to be stored and played back internally.  The ME40C also has image rotation for portrait applications.

Download the Samsung ME40C brochure (PDF)

Download the Samsung ME40C Portrait Guide (PDF)

Download the Samsung ME40C Manual (PDF)

Samsung DM32E Commercial LED LCD Display

Samsung 32” LCD Screens are 16:9 Aspect Ratio with 1920×1080 Resolution.  Built in Samsung SMART Signage Platform allows PowerPoint presentation and videos to be stored and played back internally.  The DM32E also has image rotation for portrait applications.

Download the Samsung DM32E brochure (PDF)

Download the Samsung DM32E Portrait Guide (PDF)

Download the Samsung DM32E Manual (PDF)

NEC AccuSync LCD24WMCX 24″ LCD Screen

NEC AccuSync LCD24WMCX LCD Display. 24” LCD screen. PC and Video inputs (Component & HDMI), with integrated audio speakers. Rapid Response technology, capable of producing more than 16.7 million colors. No Touch auto-adjust, Digital Smoothing, AccuColor color control, Dynamic Video Mode. Capable of displaying computer or video sources (up to 1080p), with Component & HDMI video inputs. Aspect Ratio: 16:9 Computer Compatibility: VGA up to 1080 Native Resolution: 1920×1200 Video Compatibility: 480i up to 1080p Contrast Ratio: 2,000:1

Download the NEC LCD24WMCX Brochure (PDF)

NEC AccuSync LCD22WMGX 22″ LCD Screen

NEC AccuSync LCD22WMGX LCD Display. 22” LCD screen. PC and Video inputs (Component & HDMI), with integrated audio speakers. Rapid Response technology, capable of producing more than 16.7 million colors. No Touch auto-adjust, Digital Smoothing, AccuColor color control, Dynamic Video Mode. Capable of displaying computer or video sources (up to 1080p), with Component & HDMI video inputs. Aspect Ratio: 16:9 Computer Compatibility: VGA up to 1080 Native Resolution: 1680×1050 Video Compatibility: 480i up to 1080p Contrast Ratio: 2,000:1

Download the NEC LCD22WMGX Brochure (PDF)

TV Logic LVM-173W-3G 17″ 3G SDI LCD Monitor

The LVM-173 is the higher end of TV Logic’s two 17” monitoring solutions.  This unit features a true 16:9 Aspect Ratio LCD panel with 12-bit video processing performance allowing for faithful reproduction of interlaced video and unparalleled scaling performance.  True multi-format support and standard Dual Link/3G support help to make this unit suitable for the most demanding applications.  1:1 pixel mapping modes for SD/HD.  3G/Dual-Link 4:4:4 and 1080p60 supported.  Built in on screen Waveform and Vectorscope.  Closed Caption: CEA-608/708.

Download the TV Logic LVM-173-3G Brochure (PDF)

Marshall M-LYNX-702W Double 7″ 3G SDI LCD Monitor

The Marshall MLYNX-702W is a Dual 7” rackmountable monitor with HDMI, 3G-SDI, Component, and Composite inputs.  Also includes Waveform and Vectorscope.  3G-SDI input with loop through – HDMI, Component, and Composite inputs with loop through.  Audio inputs accepts HDMI and SDI embedded audio plus analog L,R via RCA.  Audio outputs accepts HDMI and SDI embedded audio plus line level L/R RCA inputs for analog video sources.  Dual mode, full screen, or compact overlay Display Luminance waveform, Parade waveform (RGB or YPbPr), Vectorscope, Histogram, Audio Bars, and Audio Phase meter.  Tally 9-pin D-Sub port for GPI input.

Download the Marshall M-LYNX-702W Brochure (PDF)

TV Logic VFM-056WP 5.6″ 3G SDI LCD Monitor

5.6” LCD .

Download the TV Logic VFM-056WP Brochure (PDF)

TV Logic PRM-503A Triple 5″ LCD Monitor

Triple 5” LCD 2RU Mult-Channel Broadcast Rack Monitor.  Three 5” 800×400 LED backlit LCD panels with 90degree tilt range are included in the PRM-503A.  Input selection and full PRM series feature set menu is accessed via front panel.  Multi-format support up to 2k.  Built in on screen Waveform and Vectorscope.  Closed Caption: CEA-608/708.

Download the TV Logic PRM-503A Brochure (PDF)

LCD Touchscreens

NEC P551 Touchscreen

55” Multi-Touch LCD monitor.  Using the NEC P551 display model, with One World Touch glass touchscreen overlay.  Optical 4 point multi-touch technology, on a full 1080p native resolution LCD screen.  Comes with attachable speakers.  Inputs:  DVI-D, HDMI, DisplayPort, Analog VGA, Analog Component (via 5 BNC), Component RCA, Composite RCA, Composite BNC, Svideo.  1/8” & RCA audio inputs.  Comes with onboard computer module – 1.6GHz Dual Core processor, 2GB RAM, 160GB harddrive, Nvidia 9400 GPU, Windows 7 Pro.

Download the NEC P551 Touchscreen Brochure (PDF)

EloTouch ET3201L 32″ Touchscreen

EloTouch 3201L 32” Interactive Digital Signage Touchscreen.  Ultilizes Projected Capacitive 10 point touch technology.  The Intellitouch Plus surface acoustic wave multi-touch touchscreen provides display clarity which is undistorted due to use of clear glass.  The Projected Capacitive touchscreen offers a fast, accurate, drift-free touch response and is compatible with Windows 7 and 8 OS, with up to 10 touches recognized simultaneously.  Full 1080p native resolution LED lit backpanel.  Comes with onboard internal computer module – 3.3GHz Intel Core  i3 processor, HD2500 GPU.

Download the Elo 3201L Touch Screen user manual (PDF)

Download the Elo Touch dimensions (PDF)

Switchers

Barco PDS-902

The Barco PDS-902 is an extremely capable, robust switching/signal processing solution in a 1RU space.  The PDS is designed to meet today’s requirements for a high-quality, easy to use and fast seamless switcher with more digital inputs at an affordable price.  The PDS is a perfect fit for live events, boardrooms, hotel ballrooms, houses of worship, education and training facilities, and fixed installations where fast and seamless switching is needed.  All 3G models feature 4 DVI-I inputs with full HDCP 1.0 support.  Users can capture and store up to 3 images that can be used as Logo source during the presentations.  Built in test patterns also provided.  Supports all resolutions from NTSC/PAL up to WUXGA including all HD resolutions.  Independent resolutions for Program and Preview outputs.

Download the Barco PDS Series switcher brochure (PDF)

Download the Barco PDS Series switcher technical specs (PDF)

Panasonic AV-HS400A Multi Format Live Switcher

The Panasonic AV-HS400A is a compact, High-performance, Multi-format Live switcher with Multi-view output display for easy source monitoring and switching. It’s compatibility with various HD/SD formats will help you meet changing production needs as video moves toward HD on a global scale. The AV-HS400A lets you upconvert and mix SD signals with HD, to provide an easy transition to full HD production. The optional / switchable input and output boards allow you to expand the inputs and outputs to match your requirements. Comes standard with 4 HD/SD-SDI inputs and outputs, but allows for addition of up to 4 HD/SD-SDI, 4 HD/SD analog component inputs, 4 HD/SD analog composite, or 4 DVI-I inputs/outputs. With a wide range of Wipe, Squeeze, Slide, and 3D Effects, as well as RS232 control and Tally outputs for up to 8 cameras, it is the true multi format live switcher solution.

Download the Panasonic AV-HS400A Brochure (PDF)

Image Processing

Analog Way Saphyr SPX450

The Analog Way Saphyr SPX450 is a Multi-Layer Hi-Resolution Mixer Seamless Switcher with 10 inputs and Native Matrix mode.  It will accept all computer formats up to 2K / 2048×1152.    All outputs and live layers are fully resizable.  Very fast processing and true Seamless switching, with low frame delay.  2 operating modes: Mixer and Native Matrix modes.  Full audio digital compliant on DVI-D & HDMI plugs.  New EDID management on 6 inputs.  The Saphyr has the ability to read and display the output EDIDs, as well as do custom output formats.  All outputs are fully resizable, with the capability to crop the Frames and Logos.  Fully HDCP compliant.  Can do up to 3 layers on a Frame background.  Also has the ability to do layer Pan & Zoom resizing, layer Open/Close animation, and layer Border and Shadow effects.  Dynamic layer control with Flying, Zooming or Cropping.

Download the Analog Way Saphyr SPX450 Brochure (PDF)

Barco Folsom Image Pro II Dual

Folsom Image Pro 2 Dual multi-format image processor. The Folsom Image Pro 2 Dual is a powerful all-in-one signal processor that accepts a wide range of input signals and processes them into a number of different signal formats to meet the requirements of virtually any application. It is a high performance video scaler, scan converter, switcher, and transcoder in one. Universal inputs, aspect ratio conversion, memory presets, test patterns, Genlock, motion adaptive deinterlacing, and 3:2 and 2:2 pulldown detection are a few of the standard features. Some common signal conversions: 4:3 to 16:9 / NTSC to HDSDI / NTSC to PAL / HDSDI to PAL / HDSDI to SDI / PAL to SDI / UXGA to NTSC / SDI to VGA / HDSDI to NTSC / NTSC to VGA

Download the Barco Folsom Image Pro II Dual Brochure (PDF)

Vista Spyder X20 1608 Video Processor

The Vista Systems Spyder X20 provides users with a 20 megapixel bandwidth to blend, window, mix and scale any source format and then routes the signal to any destination device or combination of display devices. The Spyder X20 1608 has 16 inputs and 8 outputs that natively support any display from component analog 480i to 4K. The Spyder Stereoscopic Option (SSO) option adds full Stereoscopic support to the X20’s already extensive list of features.

Download the Vista Spyder X20 color brochure (PDF)

Download the Vista Spyder X20 Stereoscopic brochure (PDF)

Analog Way Nextage 16

The Analog Way NeXtage 16 is a powerful true-seamless AV processor designed for demanding live applications.  Based on Analog Way’s new LiveCore platform, the NeXtage 16 offers state of the art processing, as well as Soft Edge Blend capabilities for top-notch presentations.  Now with the optional upgrade for 4k resolution.  New input boards and output boards – Up to 2 x 4k 30Hz input plugs – resolution up to 4096×2160 at 30Hz.  HDMI plugs on input 1&5 now belong to inputs 2&6 and become 4k compatible.  DVI plugs on outputs 2 now become HDMI 4k compatible.  Up to two HDMI 4k 30Hz 4:4:4.  Up to two 4k 60Hz 4:4:4 inputs using four 2k inputs for Native Background.  Advanced output capabilities for Full Preview or Live Mosaic mode.  The independent output can also be used to record a specific input, or record the show live on a specific output if previewing is not necessary.

Download the Analog Way Nextage 16 Brochure (PDF)

Sierra Video Systems Lassen XL-3232 SDI Router / 32×32 XY Panel

Sierra Video Systems – Lassen XL-3232 HDSDI/SDI routing switcher.  32×32 router in a compact 3RU space – all connections BNC.  Lassen HD routing switchers incorporate multi-format and multi-rate video boards that pass HD-SDI, SDI, DVB-ASI, and MPEG-2 signals.  AES/EBU digital audio or analog stereo audio available.  TCP/IP and RS-232/422 Control.  Lassen 32×32 XY LED control panel and Lassen 16×16 Single control panel available.  Comes with redundant power supply.

Download the Sierra Lassen Brochure (PDF)

Download the Lassen XL Series 8, 16 & 32 HD SDI Manual (PDF)

Download the RS-485 Push button Control Panels (PDF)

Video Converters

Grass Valley G1/G2 Video Converters

Grass Valley ADVC G-Series multi-purpose Digital Video Converters.  Available in G1 or G2 models.  These converters tackle a variety of different AV tasks and are particularly well suited for events and staging, corporate AV centers, and broadcast display applications. ADVC G1 converter – Any In to SDI multi-functional Converter/Upconverter with Frame Synchronizer.  The ADVC G1 will convert and/or upconvert sources from HDMI, DVI, Component, Composite, Svideo, AES/EBU, and analog audio to HD/SD-SDI (3G/1.5G support).  It can also be used as an audio embedder.  It features a Reference In port which can serve as a frame synchronizer for analog inputs. ADVC G2 converter – HDMI & SDI to Analog & SDI multi-functional Converter/Downconverter with Frame Synchronizer.  Featuring HDMI and HD/SD-SDI (3G/1.5G support) inputs and HD/SD-SDI (3G/1.5G support), component, composite, Svideo, AES/EBU and analog audio outputs, the G2 plays the role of many converters in one.  Also features 3G support, downconverting, and a frame synchronizer.  Can be used as a monitoring device for HDMI and HD/SD-SDI sources, but it can also act as an HDMI to HD/SD-SDI converter.

Download the Grass Valley Gseries Video Converters Brochure (PDF)

Aja Hi5 Video Converters

From production to post and live events, AJA mini-converters offer the most complete range of compact, standalone conversion and infrastructure solutions, designed to the highest standards in reliability and quality.  AJA converters cover a full range of 4K, HD, and SD capabilities to meet your needs.  AJA mini-converters are small enough to fit behind a monitor, in the back of a rack, or directly on a camera rig.  The locking power connector won’t accidentally pull loose, and an optional P-Tap power cable allows mini-converters that support 5-20V power to be battery operated in remote locations.

Download the AJA Mini-Converters Brochure (PDF)

Lighting

High End DL2 Digital Light

High End Systems DL2 Digital Light. The DL2 is a moving, digital lighting fixture that can be controlled via any intelligent lighting controller. Has a fully integrated, on-board digital media server with Windows XP embedded. True 3D graphics engine with the ability to import 3D object images. The Content Management Application intelligently manages digital media files over Ethernet from a Mac or PC. Has on-board industrial grade nightvision camera and infrared emitter. The DL2’s also have a Collage Generator feature with Edge Blending and Curved Surface Support. This allows you to create multiple horizontal, vertical or central panoramas using a selectable array of fixtures, and manipulate it as if it were a single fixture.

Download the High End DL2 dimensions (PDF)

Download the High End DL2 brochure (PDF)

High End Whole Hog 3

High End Systems WholeHog III Lighting Controller. The WholeHog III is the ultimate lighting controller with the legendary Wholehog 3 operating system. Two large color touchscreens, with adjustable viewing angle. Ten playback faders with familiar playback controls (Choose, Go, Pause & Flash). Supports two external monitors, which can be touchscreens. MIDI input and output supports MIDI show control and MIDI time code. There are no fixed number of DMX universes, the Hog III can be expanded with additional DMX processors. Can control up to 8192 multi-parameter fixtures. System supports up to 65,536 cues, cuelists, scenes and pages, and an unlimited number of concurrent crossfades and effects.

Download the High End Whole Hog 3 brochure (PDF)

Jands Stage CL Compact Digital LED Lighting Console

The Jands Stage CL digital lighting console is designed specifically for LED fixtures but is just as suitable for conventional lights. With the Jands Stage CL you can control up to 512 DMX channels, connecting either through the DMX 512 output or the Ethernet output if your lights support Art-net. The stage CL gives you all the manual controls and automation you need to get the most out of your LED’s. Best of all it’s so easy to use you dont need to be a lighting expert to run it.

Download the Jands Stage CL color brochure (PDF)

Download the Jands Stage CL Technical Specs (PDF)

Pixel Range MicroW LED Light

The PixelLine Micro W is an 8” LED strip light. The Micro W used 22 high intensity K2 Luxeon emitters to create more than 4.2 billion color permutations. The standard beam angle is 6 degrees conical, but with the use of diffusion gels, any beam angle can be achieved. Auto ranging power supply from 100-250VAC. The Micro W can be controlled via external DMX 512, or in stand alone master/slave modes via the onboard menu. The onboard digital micro-processor has up to 29 channels of effects control, capable of more than 1000 effects. Also provides user with options to totally control effects such as: colors, chases, cycles, offsets, shutter, speeds, and fades.

Download the Pixel Range MicroW color brochure (PDF)

Download the Pixel Range MicroW user manual (PDF)

Color Kinetics 6′ ColorBlaze TRX LED Light

The Philips ColorBlaze TRX is a rugged 6ft. RGBAW LED fixture for brilliant stage lighting and stunning effects.  These stage ready fixtures incorporate channels of red, green, blue, amber, and white LEDs to achieve superior color precision and a dramatically expanded color palette.  It outperforms the competition with estimated output of over 3,000 lumens per foot.  Controllable in increments of 4in. to 6ft.  Available spread lenses offer flexibility in directing and dispersing light.  Advanced dimming and channel control – 16-bit resolution supports smooth dimming and precise color control.  Data input and standalone modes – Accepts DMX or Ethernet input from Philips and third party DMX and Ethernet controllers.  Clamp mount surface mount – The industrial grade constant torque hinges and locking handles offer stable, 165 degree rotation for quick fixture aiming and locking.

Download the ColorBlaze TRX Product Guide (PDF)

Download the ColorBlaze TRX 6 ft Spec Sheet (PDF)

Color Kinetics 12″ ColorBlast TRX LED Light

The Philips ColorBlast TRX is a fully featured RGBAW 14” LED wash/flood/spotlight, offering a significantly enhanced color range, light output of up to 1577 lumens, and onboard addressing and configuration features for ease of use and control, designed to withstand the rigors of demanding stage, set, and touring environments.  Amber and neutral white LEDs seamlessly blend with red, green, and blue LEDs to produce a significantly expanded color palette, including intense yellows, high quality whites, and a range of subtle pastel colors.  The pivoting bezel and included 23 degree soft focus and 10 degree clear tempered glass spread lenses let you switch quickly between soft edge wash lighting and extended beam projection.  Accepts DMX input from the complete Philips line of controllers, as well as third party controllers.  Standalone mode offers a configurable preset Fixed Color effect.  Adjustable dimming curves and LED transition speeds emulate the behavior of conventional theatrical fixtures.

Download the ColorBlast TRX ProductGuide (PDF)

Download the PDS-375 TRX Spec Sheet (PDF)

Download the ColorBlast TRX 23 degree Beam Angle Spec Sheet (PDF)

Download the ColorBlast TRX 10 degree Beam Angle Spec Sheet (PDF)

Cameras

Sony HSC-100R HD Produciton Video Camera

The Sony HSC-100R is opening a new world of HD Production. The HSC-100R camera supports versatile applications for HD. It uses the latest 16bit A/D conversion circuit as well as the superb 2/3inch full resolution 1920×1080 Power HAD FX CCDs to bring out high picture quality. Used together with the HXCU-100 Camera Control Unit and a remote control panel from Sony, the HSC-100R provides a genuine user friendly system. The HSC-100R’s digital triax system can be integrated into conventional triax based infrastructures, enabling an easy upgrade from existing systems. In addition to the camera’s high performance, a wide range of capturing modes are available including 1080/50i, 1080/59.94i, 720/50p, 720/59.94p, 576/50i, and 480/59.94i.

Download the Sony_HSC-100R_Brochure (PDF)

Download the Sony_HXCU-100_CCU_User_Manual (PDF)

Download the Sony_RCP750_User_manual (PDF)

Sony HXC-100 HD Produciton Video Camera

The Sony HXC-100 is opening a new world of HD Production. The HXC-100 camera supports versatile applications for HD. It uses the latest 14bit A/D conversion circuit as well as the superb 2/3inch full resolution 1920×1080 Power HAD FX CCDs to bring out high picture quality. Used together with the HXCU-100 Camera Control Unit and a remote control panel from Sony, the HXC-100 provides a genuine user friendly system. The HXC-100’s digital triax system can be integrated into conventional triax based infrastructures, enabling an easy upgrade from existing systems. In addition to the camera’s high performance, a wide range of capturing modes are available including 1080/50i, 1080/59.94i, 720/50p, 720/59.94p, 576/50i, and 480/59.94i.

Download the Sony_HXC-100_Brochure (PDF)

Download the Sony_HXC-100_User_Manual (PDF)

Download the Sony_HXCU-100_CCU_User_Manual (PDF)

Download the Sony_RCP750_User_manual (PDF)

Sony PXW-FS7K 4K Video Camera

The Sony PXW-FS7 is a 4K solid-state memory camcorder.  It shoots in 4K at up to 60p or Full HD XAVC Intra at a high frame rate of up to 180fps.  Selectable recording formats also include XAVC Long, which supports 1080/60p with 4:2:2 10-bit recording and the legacy MPEG-2 HD 422 format.  Attach an optional extension unit to open up the possibilities of multi camera shooting and Apple ProRes 422 HQ.  For external 4K/2K RAW synced to internal Full HD recording, you can connect to a compatible third party recorder, like the Convergent Design Odyssey Q7+.

Download the Sony PXW-FS7K 4K Video Camera brochure (PDF)

Marshall CV620 Full HD Broadcast PTZ Camera

Marshall Electronics Broadcast PTZ Camera is built around a professional grade 2 Megapixel 1/2.8-inch sensor with a smooth 20x Optical Zoom (4.7~94mm) block. Versatile outputs such as HD-SDI (3G), Component-VGA, DVI (HD), and Composite outputs.  Remote operation and control made easy with the VS-PTC-200 controller.  Broadcast adjustable settings such as Gain Control, White Balance, Exposure Control, Auto/Manual Focus, and other operational adjustments create tremendous flexibility of use.

Download the Marshall CV620 PTZ Camera Brochure (PDF)

Download the Marshall VS-PTC-200 PTZ Controller Installation Manual (PDF)

Canon Eos Rebel T4i

Created to make advanced photography simple, the Canon EOS Rebel T4i camera shoots both still pictures and HD video. The EOS Rebel T4i has an HD movie mode for fabulous looking HD movies, 1920×1080 video, and manual exposure control. The T4i uses an 18 Megapixel CMOS imaging sensor and DIGIC 4 image processor (APS-C size) with increased light sensitivity for low light photography. The EOS Rebel T4i is also compatible with the full line of Canon EF and EF-S lenses, and uses class 6 or better SD cards. Whether it’s the high resolution 18 Megapixel sensor, the advanced AF system, or the powerful 3.7 fps ability, the technology in the T4i ensures simplicity, speed and precision every time, and delivers stunning quality from the start.

Download the Canon EOS_Rebel_T4i_Quickstart-Guide (PDF)

Hard Drive Recorders and Players

Convergent Design Odyssey 7Q+ 4K monitor / recorder

The Convergent Design Odyssey Q7+ is a 7.7” OLED touchscreen monitor, Professional Recorder, and Playback Deck all in one.  Powerful and lightweight, it is the best and most versatile portable recorder, enabling you to record 4K Apple ProRes, RAW 4K, Canon RAW, and ARRIRAW.  The Odyssey is a brilliant 7.7” OLED monitor with 3400:1 contrast, true blacks, 1280×800 resolution and powerful monitoring tools.  A full complement of image analysis tools include a waveform, histogram, zebra, programmable False Color, Pixel Zoom with finger drag, a three-mode Focus Assist and LUTs.  View up to four HD video signals at once as a quad-split screen, or live switch between inputs – great for multi camera shoots and live streaming.  It has the ability to record more formats and signal types than any other recorder in the world.  Included in the Odyssey 7Q+ is Apple ProRes recording in HD/2K up to 60p and UHD/4K up to 30p.  Also included is Uncompressed DPX video recording in HD/2K in 10/12-bit up to 60p.  Video or RAW files are recorded to fast and reliable Odyssey SSDs, available in 256G, 512G, and 1TB sizes.  Two SSD slots allow for extended record times and high dataload recording.  Odyssey 7Q+ is capable of capturing 2K/HD up to 240fps for incredible slow-mo footage.

Download the Convergent Design Odyssey 7Q+ Manual (PDF)

AJA KiPro High Quality HDD (Hard Disk Drive) Recorder

The KiPro is a multi input HDD recorder and player designed to record and playback video and audio using hard drives. It records the source in high quality Apple ProRes 422 files. The KiPro records one video channel and up to 8 audio channels. Monitor and playback through multiple outputs simultaneously.

Download the AJA KiPro Brochure  (PDF)

BrightSign HD 1020 Media Player

The BrightSign HD1020 is a programmable media player with HDMI and VGA outputs.  Content is stored on a SD card and multiple videos can be scheduled to playback and loop.

Download the BrightSign HD1020 Brochure  (PDF)

Projection

Christie Digital Roadster WU20K-J 20,000 Lumen DLP Projector

The Christie Digital WU20K-J is an 20,000 lumens DLP projector. The Christie J Series offers 1920×1200 WUXGA resolution. The WU20K-J uses 3-chip 10-bit image processing. The Roadster WU20K-J comes with stackable rigging points for easy setup. The ability to accept a wide variety of input types, and switchable lenses make for easy operation. The WU20K-J comes standard with Christie Twist image warping and edge blending, which allows for internal blending for widescreen applications, and warping to allow you to shoot off-axis or on non standard surfaces (cubes, curved screens, ect..) Some other great features of the WU20K-J is a motorized horizontal and vertical lens offset, tilt adjustment, a built in light shutter, and Ethernet, RS232, or RS422 control.
Brightness: 18,000 ANSI lumens
Aspect Ratio: 16:10
Computer Compatibility: Up to QXGA 2048×1536
Native Resolution: 1920×1200
Video Compatibility: Up to 1080p
Contrast Ratio: 1,600-2,000:1

Download the Christie Digital WU20K-J Brochure (PDF)

Download the Christie Digital WU20K-J CAD Drawing (PDF)

Christie Digital Roadster WU12K-M 11,500 Lumen DLP Projector

The Christie Digital WU12K-M is an 11,500 lumens DLP projector. The Christie M Series offers 1920×1200 WUXGA resolution. The WU12K-M uses 3-chip 10-bit image processing. The Roadster WU12K-M comes with stackable rigging cages for easy setup. The ability to accept a wide variety of input types, and switchable lenses make for easy operation. The WU12K-M comes standard with Christie Twist image warping and edge blending, which allows for internal blending for widescreen applications, and warping to allow you to shoot off-axis or on non standard surfaces (cubes, curved screens, ect..) Some other great features of the WU12K-M is a motorized horizontal and vertical lens offset, tilt adjustment, a built in light shutter, and Ethernet, RS232, or RS422 control.
Brightness: 11,500 ANSI lumens
Aspect Ratio: 16:10
Computer Compatibility: Up to QXGA 2048×1536
Native Resolution: 1920×1200
Video Compatibility: Up to 1080p
Contrast Ratio: 2,500-10,000:1

Download the Christie Digital WU12K-M Brochure (PDF)

Download the Christie Digital WU12K-M CAD Drawing (PDF)

Christie Digital LHD700 7,000 Lumen Projector

The Christie Digital LHD700 is a 7,000 lumens LCD projector. The Christie LHD Series offers full 1920×1080 HD resolution projectors. The LHD700 uses a 4DColor technology for superior image quality and colors. The ability to accept a wide variety of input types, and switchable lenses make for easy operation. Some other great features of the LHD700 are motorized horizontal and vertical lens offset, tilt adjustment, and 3D keystone correction.
Brightness: 7,000 ANSI lumens
Aspect Ratio: 16:9
Native Resolution: 1920×1080
Video Compatibility: Up to 1080p
Contrast Ratio: 3000:1

Download the Christie Digital LHD700 Brochure (PDF)

Download the Christie Digital LHD700 Lens Throw Ratios (PDF)

Epson PowerLite 1985WU 4,800 Lumen Projector

The Epson PowerLite 1985WU is a 4,800 lumens LCD projector. The projector offers full 1920×1200 WUXGA resolution. The 1985WU uses a 3 chip LCD technology for superior image quality and colors. It has the ability to accept a wide variety of input types, wireless video streaming, and split screen. Another great feature of the 1985WU is the automatic keystone correction.
Brightness: 4,800 lumens
Aspect Ratio: 16:10
Native Resolution: 1920×1200
Video Compatibility: Up to 1080p
Contrast Ratio: 10,000:1

Download the Epson PowerLite 1985WU Brochure (PDF)

Audio

Soudcraft Si Expression 2 Digital Audio Console

The Soundcraft Si Expression 2 is a 24 input 16 output digital mixer. Powerful, intuitive digital live sound mixing with Lexicon® FX, signal processing from BSS®, dbx® and Studer®, and ViSi remote control. 40 years of Soundcraft live sound heritage delivers pristine sound quality, a feature-packed control surface, flexible I/O options and an intuitive operator experience.

Download the Soundcraft Si Expression Color Brochure (PDF)

Soudcraft Si Expression 1 Digital Audio Console

The Soundcraft Si Expression 1 is a 16 input 16 output digital mixer. Powerful, intuitive digital live sound mixing with Lexicon® FX, signal processing from BSS®, dbx® and Studer®, and ViSi remote control. 40 years of Soundcraft live sound heritage delivers pristine sound quality, a feature-packed control surface, flexible I/O options and an intuitive operator experience.

Download the Soundcraft Si Expression Color Brochure (PDF)

Soudcraft Mini Stagebox 16

The Soundcraft Mini Stagebox 16 has 16 inputs and 8 outputs. Connect to either our Soundcraft Si Expression 1 or 2.

Download the Soundcraft Mini Stagebox 16 User Guide (PDF)

HME / Clear-Com DX210 Wireless Intercom System

The HME DX210 is a 2.4GHz digital communications system.  The DX210 is a 2 channel system and up to 3 belt packs can transmit simultaneously.  In single channel mode up to 4 belt packs can transmit simultaneously.

Download the HME D210 Wireless Intercom Brochure (PDF)

Tascam SS-R200 Solid State Audio Recorder

The Tascam SS-R200 is a WAV & MP3 audio recorder that can also be used as a playback device.  Easily record to Compact Flash, SD/SHC, and USB memory.

Download the Tascam SS-R200 Audio Recorder Manual (PDF)